Complete Ready To Use Usage Instructions

Directions


NEVER USE PLASTIC TO COVER PROBLEM AREAS! This will negatively affect the cleaning process.

Complete Stain and Odor Remover Ready To Use is already premixed out of the box! That means at the time of purchase it is ready to be used, directly, on any stain without having to mix anything.
  • Shake well
  • Before using always test for color fastness by applying in a hidden area.
  • Use this product on any surface that water won't damage.
  • Do not apply sanitizers or disinfectants on surface 6 hours before or after treatment with Complete Odor and Stain Remover.

 

On Carpet or Upholstery

  1. Shake bottle well. The bacteria will naturally settle to the bottom
  2. Saturate problem area - but don't flood!
  3. Lightly agitate with hand or bottom of bottle for about 20 seconds
  4. Cover problem area with a damp, white, towel that has been soaked in very warm water. Let sit for several hours then remove towel and let air dry. (Some of the stain will be drawn up into the towel. Simply wash the towel as normal to remove stain.)
  5. Repeat if necessary

On Clothing As A Prewash

  1. Shake well.
  2. Apply directly to problem areas on clothing
  3. Lightly agitate with finger for about 20 seconds
  4. Place garment in a bowl or container of very warm water and allow to soak for 1-2 hours
  5. Remove from bowl and wash as normal in washing machine

On Clothing As An Instant Stain Remover

  1. Shake well
  2. Apply solution liberally to stain area
  3. Lightly agitate with finger for about 20 seconds
  4. Wait 1 minute and repeat process

On Concrete 

For large areas we recommend using our Concentrated Formula to get more bang for your buck.

  1. Shake well
  2. Heavily saturate problem area
  3. Cover area, if possible, to keep wet
  4. Repeat process before area is dry if necessary

On Stained Walls (Drywall)

  1. NEVER SATURATE DRYWALL WALLS - THIS COULD POTENTIALLY DAMAGE YOUR WALLS!
  2. Shake well
  3. Lightly spray product onto problem area and allow to air dry
  4. Repeat if necessary

On Stained Walls (Brick, Stone etc.)

For large areas we recommend using our Concentrated Formula to get more bang for your buck.

  1. NEVER SATURATE DRYWALL WALLS - THIS COULD POTENTIALLY DAMAGE YOUR WALLS!
  2. Shake well
  3. Saturate problem area
  4. Allow to air dry
  5. Repeat if necessary

Baseboards (For Odor Problems)

  1. Shake well
  2. Pour solution along top of baseboard and allow to air dry

On Athletic Equipment Or Shoes

  1. Shake well
  2. Saturate stained or problem area and allow to air dry
  3. Repeat if necessary

On Mattresses

  1. Shake well
  2. Saturate problem area, allowing product to seep down as deep as the stain is (often, pressing down on mattress will allow solution to soak further into material)
  3. Cover with a damp, white, towel that has been soaked in very warm water
  4. Let sit for several hours then remove towel and allow to air dry

On Vinyl Covered Mattresses

  1. Shake well
  2. Mix according to HEAVY DUTY instructions above
  3. Saturate problem area
  4. Wearing gloves, agitate problem area with a soft brush
  5. Cover with a damp, white, towel that has been soaked in very warm water
  6. Depending on the stain it may take up to several hours for stain to be completely eliminated
  7. Remove towel after stain is gone and allow to air dry
  8. Repeat if necessary

Removing Odors From Front Load Washing Machines

We recommend using our Concentrated Formula

  1. Always leave door open when machine is not in use
  2. Add 8 oz to washing machine drum - Product will activate during your next cleaning cycle
  3. Repeat every time you wash, or as-needed to eliminate odors